SRP1 Setting Tool set Retrievable Production Packer

The packer can be set by using a Hydraulic Setting Tool or in some cases an electric line tool with a setting adapter kit. To retrieve, the retrieving tool is stab in, pushed downward to latch on the packer, follow by straight pull to shear release the shear sleeve upward, this release the packer locking mechanism collapse the slips and continue upward pull will the packer out.

 The SRP1 packer is usually running, setting, release and retrieval by without tubing rotation. The element package of packer is providing the primary seal between the casing and packer mandrel. The Scoop-head design saves time when landing seal units and accessories. The packer has a Cage Slip beneath the elements simplifies releasing and retrieval. The Cage Slip design distributes stresses and remains locked to retain element compression and it holding a packer securely against well pressures from above and below. It provides a 360° casing contact and requires no slip carrier.

The packer used a c-ring release mechanism locks the packer in the set position and is Flow-isolated. The anchor lug in the top sub allows torque to be transmitted through the packer. The threaded bottom sub is for running seal bore extensions or tubing tailpipe.

 Feature

• Can be set to provide an anchor point in the well casing
• Polished bore mandrel function as a seal bore for a seal assembly
• Provides an upper connector for attachment to seal unit locators
• Diverts flow from the casing below the packer to the tubing above
• Provides a pressure isolation point in the casing
• Holds pressure from above and below once seals or a plug is installed
• Lower threaded connector to suspend tools or sand control screens
• Used with a range of other tools to achieve well completion objectives.
• Able to be milled if retrieval attempts fail.
• Full seal bore ID through the packer.
• Scoop Guide to guide tools and seals through the packer bore.